Avatar

DesignSpark PCB

关注
  • 活动总数 645
  • 最后的活动
  • 成员加入日期：
  • 正在关注 1 名用户
  • 关注者数 4 名用户
  • 投票数 61
  • 订阅数 277

活动概览

DesignSpark PCB 的最新活动
  • Avatar

    DesignSpark PCB 进行了评论，

    1. 社区
    2. DesignSpark PCB Discussion
    3. vernis épargne

    Google translates this as "my pcb provider asks me for a Gerber varnish savings file ...." which I presume is the solder resist layer which will prevent plating of all the tracks during manufacture...

    • 查看评论
    • DesignSpark PCB
    • 0 票
  • Avatar

    DesignSpark PCB 创建了一篇文章，

    创建自定义的轮廓

    1. DesignSpark PCB
    2. 创建你的PCB设计

    以下是创建具有部分圆形边缘和切口的板轮廓的步骤。此方法可用于任何电路板轮廓。下图是需要创建的电路板轮廓。 确保你具备所需的尺寸，那么工作将会轻松很多。对于设计，我们需要以下内容：   一开始，我们调整尺寸（黄色显示），例如直径与顶部宽度。 第一步，我们先创建一个宽度等于上图显示的“顶部宽度（Top width）”的长方形轮廓。至于长方形高度则与所示方法无关，因为他将折叠到弧上。 将下边...

    • DesignSpark PCB
    • 更新于
    • 0 个关注者
    • 0 条评论
    • 2 票
  • Avatar

    DesignSpark PCB 进行了评论，

    1. 社区
    2. DesignSpark PCB Discussion
    3. Vias of one net joined with planes of another net

    @Geraldo, I have been informed that Support resolved your question yesterday (check your SPAM folder if you have not seen the response), but the issue is the Via to Shape spacing as set in the rule...

    • 查看评论
    • DesignSpark PCB
    • 0 票
  • Avatar

    DesignSpark PCB 进行了评论，

    1. DesignSpark PCB
    2. Getting started
    3. Is there a book about DesignSpark PCB?

    The Chinese version is DesignSpark PCB and Mechanical. The translations were broken down into DesignSpark PCB (above link) and DesignSpark Mechanical available here.

    • 查看评论
    • DesignSpark PCB
    • 0 票
  • Avatar

    DesignSpark PCB 进行了评论，

    1. 社区
    2. DesignSpark PCB Discussion
    3. Routing with components in a circle

    For a complete circular track, select the circle tool and before using right click and select the layer you require.Now click on the centre of the circular board outline and move the mouse to creat...

    • 查看评论
    • DesignSpark PCB
    • 1 票
  • Avatar

    DesignSpark PCB 进行了评论，

    1. 社区
    2. DesignSpark PCB Discussion
    3. Routing with components in a circle

    @Kevin, below is a possible sequence.First set your segment mode to "free". In the following the relative origin is set at the centre of the circular board outline. Draw the track as straight line...

    • 查看评论
    • DesignSpark PCB
    • 1 票
  • Avatar

    DesignSpark PCB 创建了一篇文章，

    钻回退(Drill Backoff)错误，照片绘图仪和PDF

    1. DesignSpark PCB
    2. 输出文档

    我们收到以下的问题： 设计检查中的”Drill Backoff”是什么意思，可以忽略他吗？ 为什么PDF打印会有一些填充的孔？ 为什么我不能生成PDF负像？ 在回答以上问题之前，如果你需要使用正像或负像PDF来显示或运行你的PCB，请参考下面的文章。该文章讨论了如何使用Windows PDF打印机来实现。 https://designspark.zendesk.com/hc/en-us/...

    • DesignSpark PCB
    • 更新于
    • 0 个关注者
    • 0 条评论
    • 0 票
  • Avatar

    DesignSpark PCB 进行了评论，

    1. 社区
    2. DesignSpark PCB Discussion
    3. Copper pour

    This is not a an issue that has been reported previously. Please send your complete project design files to support for investigation.  https://designspark.zendesk.com/hc/en-us/requests/new

    • 查看评论
    • DesignSpark PCB
    • 0 票
  • Avatar

    DesignSpark PCB 进行了评论，

    正式评论
    1. 社区
    2. DesignSpark PCB Discussion
    3. BOM Quote uses "MPN" value instead of "Manufacturer_Part_Number"

    We have an updated template file available which can simply replace the installed file. This will automatically use both "MPN" and ."Manufacturer_Part_Number" according to what is used in the compo...

    • 查看评论
    • DesignSpark PCB
    • 0 票
  • Avatar

    DesignSpark PCB 进行了评论，

    1. 社区
    2. DesignSpark PCB Discussion
    3. BOM Quote uses "MPN" value instead of "Manufacturer_Part_Number"

    @Steve Stone can you please raise a support ticket so we can discuss further. https://designspark.zendesk.com/hc/en-us/requests/new

    • 查看评论
    • DesignSpark PCB
    • 0 票