Andy Burton

  • 合計アクティビティ 11
  • 前回のアクティビティ
  • メンバー登録日
  • フォロー 0ユーザー
  • フォロワー 0ユーザー
  • 投票 0
  • サブスクリプション 4

アクティビティの概要

Andy Burtonさんの最近のアクティビティ
  • Andy Burtonさんがコメントを作成しました:

    Ahhh now I know that the bom comes from the pcb and not the schematic Ive worked it out. You have to forward the design changes which brings the data you change on schematic to the pcb without chan...

  • Andy Burtonさんが投稿を作成しました:

    BOM not updating with new values

    I am adding RS part numbers and other part numbers to the components in the schematic but when i create the BOM these part numbers are not showing in the report.   Method of changing part number. s...

  • Andy Burtonさんがコメントを作成しました:

    There are websites that can convert images to dxf.. Its been a while since ive done this so cant point you to the best, as i use corel draw to do mine but if you search logo to dxf converter or ima...

  • Andy Burtonさんがコメントを作成しました:

    This happened to me. The gerber export was not exporting the text. The setting ringed was set to yes so i set it to no then set it to yes and now the text exports. Bit gutted because i just sent a ...

  • Andy Burtonさんがコメントを作成しました:

    Good news. Gerber re-sent with correct settings The gerber viewer showed the same errors but they accepted the design so lets see the results when they arrive.

  • Andy Burtonさんがコメントを作成しました:

    This is where im going wrong then. The gerber setup is all as you posted but i had all layers selected. THis is probably why those companies are saying there is legend in the copper layer. What are...

  • Andy Burtonさんが投稿を作成しました:

    gerber file problems

    Im having problems with my first pcb design. If i create a board using mechanical which is just a rectangle with 1mm rounded corners the online gerber viewer does not see the outline. If i create a...