メインコンテンツへスキップ

Trying to import a part using Library Loader

コメント

3件のコメント

  • Boss .

    From experience I know this can happen if the Library Loader "Download" folder is not pointing to your default Windows download folder. The component downloads, but LL does not extract it.

    If that is not the solution then contact DS or Samacsys for support.

    If you actually have the part you can extract to the library with LL using an option on the menu bar.

    0
  • Brad Levy

    It can also happen if you didn't have DS PCB open when you downloaded the part.

    Opening DS PCB then using the Open ECAD Model link in the library loader and selecting the library you just downloaded will extract it after-the-fact. Or you can just download the part again while DS PCB is open.

    0
  • Steve Stone

    Brad Levy - Thanks - I did this in the end to get my part in.

    Boss . - That was my problem. At some point in the past I had set the downloads folder to be a sub-folder within downloads to make the parts easier to find. I set it back to the Windows default 'Downloads' and it started working again.

    0

ログインしてコメントを残してください。