メインコンテンツへスキップ

コメント

4件のコメント

  • Boss .

    Hi Jan, the tschnology file does save colours, edit your colours and anything else you want to change such as track sizes and then save this as a technology file with a new name e.g. "double sided - My colours".

    When you next start a new design select that technology file and it's all set to go.

    0
  • Jan Kratochvil

    Hi Boss,
    thank you for your answer, but it is still unclear for me. Let me explain my situation. When I open for example new schematic design file "Test.sch" and chose to use technology file "default" (https://i.imgur.com/8kJxjWW.png ) I can after that find in "Document properties" of this new schematic design file atribute "Technology" which pointing to the technology file. ( https://i.imgur.com/jiu6B37.png ) OK, I have new test schematic file which using some existing technology file.
    Now, when I modify some colours setting and save the file "Test.sch" my colours settings are saved. But the change of the colours is saved to the schematic file not to the technology file. This is the screenshot of the colours change in editor, left schematic file before change right after change of colours( https://i.imgur.com/HyRi0nv.png ) You can guess I made change from black to white. Compared to that, there is no change in technology file. Technology file is only changed when I directly open them do some changes and save. So it seems to me than when I'm in opened project and have opened some schematic and pcb files (read working on a project) all changes of the colours are saved to this files (.sch /.pcb) not to the technology file so each project has it's own colours setting and on tech. file it doesn't matter at all. And futher when I have some schematic and pcb files which is based on some technology file (name of tech. file is visible in properties) and I directly modify colours settings in this used technology files no changes of the colours is propagated to the already existed schematic and/or pcb files. So, back to my original question "How can I transfer the settings of colours between my project ?"

    0
  • Jan Kratochvil

    Shortly - I mean that "colour information carrier" is not technology file but schematic and/or pcb file. Colour informations in technology file is only used when creating new file, like a template. There is no posibility to transfer settings of colours between existing projects.

    0
  • Boss .

    Hello Jan,

    You are correct the schematic and PCB save the colours in those files so when you reopen them it is all as you last used them. Looking through your message you do not mention saving a new technology file as far as I can see.

    From you colour configured design file Select File - Save Technolgy File from each of the sch and pcb windows. Give the file a new name so you don't overwrite the supplied files.

    When you start a new project select the technology file you created from the list and you should have your colours and all other settings as were current when the file was saved.
    No changes to a technology file will occur until you specifically save them, so you can develop it slowly and save from the sch or pcb as required.

    Sorry if you have tried this as I was unclear on the end part of your message.

    0

ログインしてコメントを残してください。