Need help with mirror effect

Darrel Burt

• 2016年11月02日 00:52

I am attempting to mirror one of the projects that I am working on. Is there away to do a mirror effect or would I have to do the whole thing over from scratch? 

0

• 

  Jacant

  • 2016年11月02日 21:33

  Save the file as an STL file Open it in Netfabb or Windows 3D Builder. Mirror there. Save as STL. Insert file into DSM Convert to Solid. Merge Faces

  One problem with this. If the model has any curves, all of the facets will be preserved.

  If you want to mirror 2D sketches. Draw a line where you want it mirrored. Right click line - Set as Mirror line. Now use the Project to Sketch tool. Pick all of the lines you want to mirror. Delete Mirror line and delete lines not required.

  0
• 

  Darrel Burt

  • 2016年11月03日 23:46

  Thank you I will try it out. 

  0
• 

  Paulo Oliveira

  • 2016年12月08日 18:34

  Mirror line/plane work if you star your model with then activated. Its not possible to mirror a model after finished...

  0

サインインしてコメントを残してください。