I have drill holes for example to place screws that should be grounded (flooding).
When I do Cu pouring on either primary or secondary side this drill holes are covered with Cu. I don't want these holes to be covered since they are used to indicate where to drill after etching.
The strange thing is that they are not covered when looking at the display/screen but when I do a print of this layer the get filled.
Other drill holes for example hole mounted components are holes as expected ( 'Fill Drill Holes' is not checked in the print men revisions when looking at old printouts.
When using 'thermal on Pads' with spoke/isolation I got thermals on these holes/pads and drill holes as expected.
My conclusion is that it seems to be a error with Cu pouring now,(correct?):
The drill holes seems to be not working when Cu pouring and holes should be flooding.
Or is there something that should be done in another way?