Michael Gauthier
- Activité totale 46
- Dernière activité
- Membre depuis
- Abonné à 0 utilisateur
- Abonnés 0 utilisateur
- Votes 6
- Abonnements 12
Aperçu des activités
Dernière activité effectuée par Michael Gauthier-
Michael Gauthier a ajouté un commentaire,
Thank you both. I made a single slit and cut it through. Then I selected all 4 surfaces and patterned that around. Works fine. Thank you!
-
Michael Gauthier a créé une publication,
Trouble cutting slits in a cup
As you can see in this image, I was able to put 60 1mm slits on this cup but they must be cut through the cup. I select one of them and try to cut it through and it does it, but the others disappea...
-
Michael Gauthier a ajouté un commentaire,
Yes, that works.. Thank you!
-
Michael Gauthier a créé une publication,
90 degree pipe with a large end and a small end
I can't quite figure out how to create a 90 degree elbow pipe with 14.5mm ID and 16mm OD on one end and a 18.25 ID and 20mm OD on the other. I started with a 90 degree arc on a 40mm diameter, creat...
-
Michael Gauthier a ajouté un commentaire,
Got it... Thank you for the help Jacant.
-
Michael Gauthier a ajouté un commentaire,
George, I believe I have viewed all available tutorials on this product. I have designed hundreds of objects using DesignSpark over about 2-3 years. I am fairly good at using many of the tools. Ho...
-
Michael Gauthier a créé une publication,
How to align a face to a grid.
I have a solid with several faces at odd angles. I want to rotate the entire object so the selected face is aligned to the grid and becomes the "bottom" of the object. Example: Draw a 6 sided obje...
-
Michael Gauthier a ajouté un commentaire,
Yes, I selected the planes starting at the bottom right and sweep up and left. The planes do highlight but as soon as I let go of the mouse button they un-highlight. I must be doing something wron...
-
Michael Gauthier a ajouté un commentaire,
It does not work for me. I see you select Combine, then you touch the body of the boat to highlight it. Then you draw a selection box to capture the bottom of each plane. That causes them all to b...
-
Michael Gauthier a ajouté un commentaire,
Nicosbou In the example you provided, you appear to select all the cut points (planes) at one time. I am able to make the pattern just fine, but when I try to select all the planes at once to cut, ...