Anders Hörberg

  • Activité totale 46
  • Dernière activité
  • Membre depuis
  • Abonné à 0 utilisateur
  • Abonnés 0 utilisateur
  • Votes 0
  • Abonnements 12

Aperçu des activités

Dernière activité effectuée par Anders Hörberg
  • Anders Hörberg a ajouté un commentaire,

    kdahlmann Lets rewind the tape some - i´m not saying that bottom or back side always should be ground, you are missing my question.. IF i have a plane...whatever plane... and sink in this case the ...

  • Anders Hörberg a ajouté un commentaire,

    Hi Boss Yes ofcourse i´m using the (paid) version :-) haha, we have had a few conversations before, and yes i´ve been using the free version for several years, but never came in to this problem bef...

  • Anders Hörberg a ajouté un commentaire,

    Hi, Thanks for the advise on Switching off DRC, coulden find that info anywhere "spiders" is the connections between the components before routing :-), dident know what to call it.. Anyway, let me ...

  • Anders Hörberg a créé une publication,

    PCB Vias

    Hi guy´s Trying to work out a problem I have created a 2-layer board - Sch -> PCBWhen routing i come across some issues... lets say that we have 3 "spiders" for 3 connectors on each side of the boa...

  • Anders Hörberg a ajouté un commentaire,

    Question: really - if you turn off the check on "split nets" it will change to a warning when using Add Block, but still will translate fine to PCB, so is there a danger involved just using it anyw...

  • Anders Hörberg a ajouté un commentaire,

    Hi again Boss Tried it, and went along with the link, tried all permutations, there is also a "from", but no matter what i do BLOCK, assignemnt of net to pins, TO or from, drawing short net or what...

  • Anders Hörberg a ajouté un commentaire,

    Testing like a madman here LOL Tried to add 3v3 net in design technology, and assigned both components pins to this net, and it gives me the same answer as if i user block ports.... Sorry, but i´m ...

  • Anders Hörberg a ajouté un commentaire,

    Hi, was trying a few things here... it seems that you can assign a specific pin on a connector/mcu/component to a selectable net and have it display the net next to the pin.. Now where can you add ...

  • Anders Hörberg a ajouté un commentaire,

    Hi boss, and thanks for your answer Not sure how to do this, the Block port is similar to what i´m used to Can you step by step explain how to draw a short net?, and can you assign it to a symbol l...

  • Anders Hörberg a créé une publication,

    Blocks

    Hi guy´s Whats all this with blocks Problem - i want to assign a global labels like in Kicad instead of pulling wires all the time like a rats nest from the MCU... how is this managed in DSpcb? see...