Aller au contenu principal

Trouble with offset and pull

Commentaires

1 commentaire

  • Jacant

    When you go from 2D to 3D 'Pull' there should be one 'Surface ' with a 'Spline' 0.8 in from the edge. If you hover over you will be able to 'Pull' either of the separate 'Surface' areas. If you can't then the inner 'Spline' line is not joined correctly.

    If you can't fix it then just draw the outer shape and 'Pull' that into a 'Solid'. Then use the 'Shell' tool with a 0.8 thickness; pick one end then the other to make it hollow.

    0

Vous devez vous connecter pour laisser un commentaire.