Scale feature to adjust symbol size

ilker Bulut

• 31 janvier 2017 07:32

Hi,

 

would be very nice to have a scaling feature in the symbols editor. For now I am opening the symbol with the editor and make it bigger.

For example the coil symbol, when I insert to my page which is A4 Landscape size the symbol looks very small in the design.

Hope to hear some change here.

1

• Commentaire officiel

  

  DesignSpark Electrical

  • 14 février 2017 16:44

  Hi, Here is a suggestion which may help.

  With the symbol opened go to ‘Modify’ menu and use the ‘Scale’ command:

  

  But the symbols size is standard. If you use an ISO title block (set by default for IEC template):

  

  And an Imperial Unit system configuration (set by default for ANSI template, IEC template has it set to Metric):

  

  Then the symbols appear very tiny in the scheme:So you need to make sure your title blocks and unit system configuration are set to the same type of unit.

  

  Does that help?

   
• 

  ilker Bulut

  • 5 mars 2017 20:28

  Thanks for the reply.. For the common parts if needed I open the part and change the scale. This way is working for now.

  0

Vous devez vous connecter pour laisser un commentaire.