Peter Sarro
- Total activity 40
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 9
- Subscriptions 13
Activity overview
Latest activity by Peter Sarro-
Peter Sarro commented,
Thank you Brad for the links and information. This looks very exciting to see these additional changes in DS PCB and at a reasonable price. I will have to give the pro version a try. Thank you.
-
Peter Sarro commented,
Thank you Dave. I will have to give the pro version a tryout. Very exciting!
-
Peter Sarro created a post,
DesignSpark PCB vs DesignSpark PCB Pro
1 - Can anyone at Design Spark provide a table that shows what Design Spark PCB Pro vs Design Spark PCB offers? 2 - As I understand it, Design Spark PCB Pro is only available in the UK. Will it ...
-
Peter Sarro created a post,
Problem with website: www.rs-online.com/designspark/home
It's incredible that for all the available links on the designspark website that there is no direct link to report issues or problems with the website which is why I'm posting it here in the commun...
-
Peter Sarro commented,
I'm still using version 7 (most current) and I am now getting the same dialog at startup that DesignSpark PCB is unable to verify authorisation that Dam Korneff reported. However, a few seconds lat...
-
Peter Sarro commented,
Hello J R: Yes ! That certainly fixed the issue of placing the imported object ! Obviously, reassigning the origin is a subtlety that one doesn't realize is there until someone else points it o...
-
Peter Sarro commented,
I have been experimenting further with the DXF import: It certainly works but is largely dependent on the particular image/logo to be converted and the conversion itself. However aside from the q...
-
Peter Sarro commented,
UPDATE: I have been experimenting with this feature: I used the logo on the Design Spark website which is 302 pixels wide x 37 pixels high. The logo says "DESIGNSPARK" in dark gray and red. After...
-
Peter Sarro commented,
I tried the conversion service mentioned at www.autotracer.org: I converted 3 different logos to DXF format (without Splines); All of the logos have color in them and when converting I set the c...
-
Peter Sarro commented,
Yes, I have also seen that; Seems to depend on the particular component.