
Jayx .
- Total activity 283
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 19
- Subscriptions 109
Activity overview
Latest activity by Jayx .-
Jayx . commented,
It's called buried or blind via and is not possible in the free version of DSPCB, see here: https://designspark.zendesk.com/hc/en-us/articles/360002484738-Why-should-I-upgrade-to-DSPCB-PRO- Also wo...
-
Jayx . commented,
Sorry, I've misunderstood. These slotted pads are actually not SMT, they are through hole and as such they need to be on all layers. If you get them on the gerber for the mechanical layer, then mos...
-
Jayx . commented,
To cycle through overlapping elements press "n" on the keyboard. SMD pad shouldn't be on all layers, only copper layers (don't see the instruction saying to create it on all layers?). By the way, s...
-
Jayx . commented,
That's what I thought, but after this incident with TLS protocol I thought something is not right. DS Mechanical stopped working immediatelly, not after 30 days of being unable to communicate with ...
-
Jayx . commented,
DesignSpark Mechanical team, yes I've seen what was the underlying issue but I thought that the software will run off-line for 30 days so we should get the message and still be able to start DS Mec...
-
Jayx . commented,
Tha patch is working, but still no explanation how it stopped so suddenly (not after 30 days of being offline!)
-
Jayx . commented,
I've got the same problem, but wondering why it says that license was cecked more than 30 days ago? I've used it last weekend and it was working, I can't remember any message about lack of comunica...
-
Jayx . commented,
Hi Eugene, I've used Elecrow in the past, but the same should apply to JLCPCB. Slots outline should be drawn on the mechanical layer (the same as PCB outline). For plated slots, I've had a pad on b...
-
Jayx . commented,
Unfortunatelly not. Excellon is very old and simple file, originally used to directly drive Excellon drilling machines. Contains only drill bit size and coordinates, nothing else.
-
Jayx . commented,
As far as I know, technically there is nothing in Gerber to indicate if the hole should be plated or not. The same for a drill file. That's one of the limitation of the legacy format and the reason...