Jacant
- Total activity 1104
- Last activity
- Member since
- Following 2 users
- Followed by 1 user
- Votes 16
- Subscriptions 372
Activity overview
Latest activity by Jacant-
Jacant commented,
...The diamonds on the steel plate are 24 x 4mm and when scaled down is 0.48 x 0.08mm... Dependent on what printer or material you plan on using, I don't think that most printers could achieve this...
-
Jacant commented,
I would seriously consider going through all of the tutorials and videos. https://designspark.zendesk.com/hc/en-us/sections/202853505 https://designspark.zendesk.com/hc/en-us/sections/202625729
-
Jacant commented,
Position your coin and use the 'Project' tool, selecting the faces that make up the coin. Hide the coin and 'Pull' the parts you want to be in relief. Don't make your coin too intricate, flat surfa...
-
Jacant commented,
I would concentrate on getting one shape correct at full size. Then 'Pull/Scale' to 1/50. Use the 'Move' tool with the 'Create pattern' option to the amount of copies required.
-
Jacant commented,
It my be easier to split the path into straight lines. Using it this way will give you the options using the 'Tab' key to select the distance between copies. There is a 'Padlock' next to each optio...
-
Jacant commented,
Draw one circle on the line you want to follow. Select the circle and the 'Move' tool with the option to 'Create patterns. If it is a straight line then use 'Upto' the end of the line. type in 'Cou...
-
Jacant created a post,
HenkSHEQ
In response to this question. https://www.rs-online.com/designspark/mechanical-software/questions/joining-lines-and-object-to-path-in-2d#comment
-
Jacant commented,
The solid on the left has a line drawn on the face. That is part of the solid. This will not Pull correctly. I don't know why. The solid on the right has the edge pulled in to create a Surface. Thi...
-
Jacant commented,
I keep trying to replicate this, I just can't do it. I have noticed in your structure tree Buk that there is only a solid. Whereas mine has a solid and a surface. When I Pull the edge of the solid ...
-
Jacant commented,
It works for me. I would check the Geometry.