Jacques Delaire
- Total activity 14
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 3
- Subscriptions 4
Activity overview
Latest activity by Jacques Delaire-
Jacques Delaire commented,
Hi Boss, You are right I have got same idea as described in FAQ about fiducials. I agree with you that via is also a solution but for this project I have preferred to get testpoint without via. Tha...
-
Jacques Delaire commented,
It is effectively very painful to get testpoint without Solder Paste.
-
Jacques Delaire commented,
I have started to used testpoint in my drawing and then I have got them on my PCB. But by this way, they were in the Paste Mask. I don't want to get paste on these test points. Finally I have creat...
-
Jacques Delaire created a post,
How to get test point
On my project I have testpoints. But, up to now, I haven't succeeded to get them of course in the top copper but out of the Solder Mask (I mean not masked) and out of the Paste Mask (I don't want t...
-
Jacques Delaire commented,
Thanks a lot Brad. Now I have fully understood how I can do it.
-
Jacques Delaire created a post,
Define my own full soldermask as a ring on a pcb for instance
I need for my pcb to keep poor area on the border of the pcb and poor area in the center of the pcb without solder mask. Then more or less my solder maks is a kind of ring between this 2 pour area....
-
Jacques Delaire created a post,
How can I have on bottom side ground plane and VCC plane on a 2 layer PCB ?
It seems it is not possible to put 2 planex on the same layer. Or at least I don't succeed to get correct gerber file. In addition I want to get solder mask on GND plane but not on VCC plane That i...