Dennis Miller

  • Gesamtaktivitäten 8
  • Letzte Aktivität
  • Mitglied seit
  • Folge ich 0 Benutzer
  • Gefolgt von 0 Benutzer
  • Stimmen 1
  • Abonnements 2

Aktivitätsübersicht

Neueste Aktivität von Dennis Miller
  • Dennis Miller hat einen Kommentar hinterlassen

    Thanks Andreas!  That makes since now.  "be aware that "With" must be a little larger than this diameter" I tried this.  I set the Width the same as the Hole Size and unchecked the "Plated" box.  I...

  • Dennis Miller hat einen Post erstellt

    Adding Mounting Holes

    I would like to add 4 mounting holes to the board corners.  The holes should be large enough to pass an M3 screw.  They do not need an electrical connection to any Net. I have looked and looked for...

  • Dennis Miller hat einen Kommentar hinterlassen

    Thank you.  I have ordered the boards.  Hopefully, the manufacture will accept the Gerber files as sent. 

  • Dennis Miller hat einen Kommentar hinterlassen

    Thanks!  Got it. Questions:  (A) Is this "Board Outline" used by the pcb manufacture to determine where to cut the board to size?  (B) Is this gerber plot any different than the green rectangle boa...

  • Dennis Miller hat einen Post erstellt

    Board Outline Required by PCB Manufacture

    HI.  New to pcb design.  I have created a small simple adaptor board to convert a  replacement relay pinout to an old and no longer made relay to use in an amplifier.  From the pcb manufacture:  "B...