
Boss .
- Gesamtaktivitäten 675
- Letzte Aktivität
- Mitglied seit
- Folge ich 1 Benutzer
- Gefolgt von 3 Benutzer
- Stimmen 75
- Abonnements 591
Aktivitätsübersicht
Neueste Aktivität von Boss .-
Boss . hat einen Kommentar hinterlassen
Hi jerry delacruz, just as you change the width of a line by selecting its style. If the line exists, select and from the right-click options change the style.If a new line, such as an open shape u...
-
Boss . hat einen Kommentar hinterlassen
Hi Bryce, this was a DSPCB article.
-
Boss . hat einen Kommentar hinterlassen
Hi Victor, you need to be connected to activate and then at least once every 30 days.The OS can be Windows 7, 8 or 10
-
Boss . hat einen Kommentar hinterlassen
Using the Output -> DSM IDF (which is specific for DSM compatibility) both files are in my DesignSpark Mechanical folder within the DSPCB project folder. I used the default output "Silkscreen (defa...
-
Boss . hat einen Kommentar hinterlassen
Hi Daljeet, having been following an interesting discussion on the forum regarding copper pours which referred to this article I saw your comment. Always ask questions like this on the forum to rea...
-
Boss . hat einen Kommentar hinterlassen
The Eagle ULP method can be problematical. It may be easier to install a later version of Eagle open your design and save in this new version. Then you can open the Eagle file directly in DSPCB V8....
-
Boss . hat einen Kommentar hinterlassen
Hi Richard, haven't heard of anyone having problems with Graphics cards with DSPCB. It's best to post questions in the forum rather than as comments to FAQ'shttps://designspark.zendesk.com/hc/en-us...
-
Boss . hat einen Kommentar hinterlassen
1 - Why calling a pin: a pad??? That is confusing...With a schematic it is normally called a pin, e.g. 8 pin DIL 2 - Why pin number the pin name are not attached to the pin under the same menu???3 ...
-
Boss . hat einen Kommentar hinterlassen
I don't have a 4k display, but find I can change the grid for the task to get the best visibility. Try checking the Lines box and also choose a colour from the pull down menus, it may help on a 4k...